 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GaAs INTEGRATED CIRCUIT UPG2155TB NEC's L-BAND 4 W HIGH POWER SPDT SWITCH DESCRIPTION The PG2155TB is an L-band SPDT GaAs FET switch developed for digital cellular or cordless telephone applications. The device can operate from 500 MHz to 2.5 GHz, with low insertion loss and high linearity. FEATURES * Low insertion loss : LINS = 0.35 dB TYP. @ Vcont = +2.6 V/0 V, f = 1.0 GHz : LINS = 0.40 dB TYP. @ Vcont = +2.6 V/0 V, f = 2.0 GHz : LINS = 0.45 dB TYP. @ Vcont = +2.6 V/0 V, f = 2.5 GHz * High linearity : 2f0 = 70 dBc TYP. @ Vcont = +2.6 V/0 V, f = 0.9 GHz, Pin = +34.5 dBm : 3f0 = 75 dBc TYP. @ Vcont = +2.6 V/0 V, f = 0.9 GHz, Pin = +34.5 dBm * 6-pin super minimold package (2.1 x 2.0 x 0.9 mm) APPLICATION * GSM Triple/Quad band digital cellular ORDERING INFORMATION Part Number Order Number Package Marking G4R Supplying Form * Embossed tape 8 mm wide * Pin 4, 5, 6 face the perforation side of the tape * Qty 3 kpcs/reel PG2155TB-E4 PG2155TB-E4-A 6-pin super minimold (Pb-Free) Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: PG2155TB-A Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. Document No. PG10583EJ01V0DS (1st edition) Date Published November 2005 CP(K) (c) NEC Compound Semiconductor Devices, Ltd. 2005 UPG2155TB PIN CONNECTIONS (Top View) 1 2 3 6 5 4 6 5 4 (Bottom View) 1 2 3 Pin No. 1 2 3 4 5 6 Pin Name OUT1 GND OUT2 Vcont2 IN Vcont1 ABSOLUTE MAXIMUM RATINGS (TA = +25C) Parameter Control Voltage Input Power Operating Ambient Temperature Storage Temperature Symbol Vcont Pin TA Tstg Ratings +6.0 +38 -45 to +85 -55 to +150 Unit V dBm C C RECOMMENDED OPERATING RANGE (TA = +25C) Parameter Control Voltage (High) Control Voltage (Low) Symbol Vcont (H) Vcont (L) MIN. +2.4 -0.2 TYP. +2.6 0 MAX. +5.0 +0.2 Unit V V G4R 2 Data Sheet PG10583EJ01V0DS UPG2155TB ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont = +2.6 V/0 V, ZO = 50 , off chip DC blocking capacitors value: 56 pF, unless otherwise specified) Parameter Insertion Loss Symbol LINS Test Conditions f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz Isolation ISL f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz Input Return Loss Output Return Loss 0.1 dB Loss Compression Input Power 2nd Harmonics 2f0 RLin RLout Pin (0.1 dB) f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz f = 0.9 GHz f = 1.8 GHz f = 0.9 GHz, Pin = +34.5 dBm f = 1.8 GHz, Pin = +31.5 dBm 3rd Harmonics 3f0 f = 0.9 GHz, Pin = +34.5 dBm f = 1.8 GHz, Pin = +31.5 dBm Switching Speed Control Current tsw Icont RF Non MIN. - - - 22 17 15 15 15 - - 67 64 67 64 - - TYP. 0.35 0.40 0.45 24 19 17 20 20 37.5< 37.5< 70 70 75 75 1 0.5 MAX. 0.45 0.50 0.55 - - - - - - - - - - - 5 5.0 Unit dB dB dB dB dB dB dB dB dBm dBm dBc dBc dBc dBc s A Data Sheet PG10583EJ01V0DS 3 UPG2155TB EVALUATION CIRCUIT Off chip DC blocking capacitors value C1 = 56 pF, C2 = 1 000 pF (Bypass), using NEC standard evaluation board. C2 Vcont2 C1 IN C1 OUT2 Vcont1 C2 C1 G4R OUT1 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. TRUTH TABLE Vcont2 IN Vcont1 OUT2 GND OUT1 Vcont1 High Low Vcont2 Low High IN-OUT1 ON OFF IN-OUT2 OFF ON 4 Data Sheet PG10583EJ01V0DS UPG2155TB PACKAGE DIMENSIONS 6-PIN SUPER MINIMOLD (UNIT: mm) 2.10.1 1.250.1 2.00.2 1.3 0.65 0.65 0.1 MIN. 0.90.1 0.7 0 to 0.1 0.15+0.1 -0.05 0.2+0.1 -0.05 Data Sheet PG10583EJ01V0DS 5 UPG2155TB RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Wave Soldering Peak temperature (molten solder temperature) Time at peak temperature Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Partial Heating Peak temperature (terminal temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 WS260 Condition Symbol IR260 For soldering Preheating temperature (package surface temperature) : 120C or below Caution Do not use different soldering methods together (except for partial heating). 6 Data Sheet PG10583EJ01V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of UPG2155TB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |